B74.2 Titanium Upper Screw Set (Batch #2)

 **in stock now**

Schelle premium Titanium screws are made of Grade 5 Titanium Alloy (commonly known as 6Al-4V) with a bright machined finish to give your car that pure racing look.  Unlike Grade 2 known to be used by other brands, the Grade 5 Titanium alloy is the most desirable, giving 40% lighter weight and corrosion resistance compared to steel.  

The Schelle B74.2 Set of 54 Titanium screws strategically removes kit steel screws from up high above the chassis, which lowers the CG and improves handling. In addion, we've included stainless steel button head screws to complete the look and keep the cost reasonable.  The17 center spine screws along with the battery strap adjust screws also included in stainless.   All chassis bottom screws are not included in this set.  M3 screws only (no swaybars or set screws, no motor screws).

B74.2 Titanium Upper Screw Set:

1.    Premium Grade 5 Titanium Alloy screws with bright machined finish
2.   54 pcs. set comes grouped by length.  17 pcs Stainless Steel screws included for center spine.
3.    18g weight savings (2/3 oz). 
4.    Large sized Button Head Schelle Ti screws additional features: 1) no rust   2) sharp threads, will not unscrew   3) deep 2mm hex won't strip
5.    For B74.2 kits (only change is updated rear hubs to BH screws).  Set packaged in poly bags sealed by length.  Locations spec'd out below.

** Pre-Tap all holes with a steel screw or M3x0.5 tap before installation.**

Screw list:

• M3x6 BH: Servo top plate (4)
• M3x8 BH: front body mount (2), steering block arms (4), center top plate (2)
• M3x10 BH: rear gearbox top (4), rear tower (2), front tower(4), center top plate (2)
• M3x12 BH: gearbox/spine f/r (4), rear tower (2), steering block (2), rear hub (4)
• M3x14 BH: front gearbox(2), steering block (2), upper fan (2)
• M3x16 BH: steering rack (2), front shock arm (2), lower fan (2)
• M3x22 BH: shocks standoff (4)
• M3x10 FH: rear wing (2)

• Stainless M3x8- Center Spine (7)
• Stainless M3x10- Center Spine/Bulkhead (4)
• Stainless M2.5x6  BH nose cone screw

• Not included:  Motor screws, Motor mount slide screws, Chassis bottom screws. M2.5 screws.